Physical Condition |
Constructions: |
Polycarbonate radome,detachable cable/connector for easy mount, rubber-O-ring between top radome and screw base for waterproof |
Dimensions: |
60mm(Dia.) x 18.5mm(H) |
Weight: |
200grams (w/o cable & connector). |
Color: |
Standard in ivory white, other colours available upon request. |
Mounting: |
Bulkhead mount with 0.8 inch threaded wing nut (standard accessory). FB6 2.5mm SUS L-Mounting |
Cable & Connector |
RF cable: |
SMA(M) +10 meter RG58 +TNC(M) (standard) other length (optional) |
Pulling strength: |
6 Kg @ 5sec. molded plastic on connector end for strain relief. |
Connector |
TNC(F) or SMA(F) |
Antenna Element |
Center Frequency: |
2338.75 MHz +/-6.25 MHz |
Polarization: |
R.H.C.P. (Right Handed Circular Polarization). |
Absolute Gain @ Zenith: |
+2 dBi typical. |
Gain @ 10° Elevation: |
1 dBi typical. |
Axial Ratio: |
3 dB max. |
Output VSWR: |
2.0 max |
Output Impedance: |
50 ohm |
Low Noise Amplifier |
Center Frequency: |
2338.75+/-6.25 MHz |
Power Gain: |
30db +/-1db |
Bandwidth: |
10 MHz min. |
Noise Figure: |
1.0 typ |
Outer Band Attenuation: |
10 dB min. @ Fo +/-10 Mhz. |
Supply Voltages: |
4~5.5V DC. |
Current Consumption: |
4V : 10.3 mA Typical 4.5V : 12 mA Typical 5V: 13 mA Typical 5.5V: 15 mA Typical |
Output Impedance: |
50W ohm |
Overall Performance: (antenna element, LNA & coax cable) |
Center Frequency: |
2338.75+/-6.25 Mhz. |
Gain: |
At 90° vertical to sky 30 ± 4.5dBi (cable loss) Note:1 Mounted on the 60mm x 60mm square ground plane |
Noise Figure: |
1.0 max. |
Axial Ratio: |
2 dB max. |
Bandwidth: |
10 MHz min. @S11≤-10 dB |
VSWR: |
2.0 max. |
Output Impedance: |
50W ohm |
Environmental |
Operating Temperature: |
-40°C~ +85°C. |
Storage Temperature: |
-40°C~ +90°C. |
Relative Humidity: |
95% non-condensing. |
Water Resistance: |
100% waterproof. |