| PHYSICAL CONDITION |
| Constructions: |
Polycarbonate radome,detachable cable/connector for easy mount, rubber-O-ring between top radome and screw base for waterproof |
| Dimensions: |
60mm(Dia.) x 90mm(H) |
| Weight: : |
65grams (w/o cable & connector). |
| Color: |
White or Black (Optional) |
| Mounting: |
Bulkhead mount with 0.8 inch threaded wing nut (standard accessory). |
| Cable & Connector |
| RF cable: |
RG174-20CM |
| Pulling strength: |
6 Kg @ 5sec. molded plastic on connector end for strain relief. |
| Low Noise Amplifier |
| Center Frequency: |
1575.42 +/- 1.023 MHz |
| Power Gain: |
28 db +/-3db |
| Bandwidth: |
10 MHz min. @S11£-10 dB |
| Noise Figure: |
1.5 |
| Outer Band Attenuation: |
3 dB max. |
| Supply Voltages: |
2.5~5.5V DC. |
| Current Consumption: |
at 2.5V 6.6mA Typ.at 3.0V 8.6mA Typ.at 4.0V 12.6mA Typ.at 5.0V 16.6mA Typ. |
| Filter |
20dB 25dB @ fo+/- 50MHz
30dB 35dB @ fo+/- 100MHz* fo=1575.42MHz
|
| Overall Performance: (antenna element, LNA & coax cable) |
| Center Frequency: |
1575.42 +/- 1.023 MHz |
| Gain: |
At 90o vertical to sky 30 ± 4.5dBi(cable loss) Note:1Mounted on the 60mm x 60mm square ground plane |
| Noise Figure: |
1.5 max. |
| Axial Ratio: |
3 dB max. |
| Bandwidth: |
10 MHz min. @S11£-10 dB |
| VSWR: |
2.0 max. |
| Output Impedance: |
50 ohm |
| Environmental |
| Operating Temperature: |
-40oC~ +80oC. |
| Storage Temperature: |
-40oC~ +80oC. |
| Relative Humidity: |
95% non-condensing. |
| Water Resistance: |
100% waterproof. |
