| Physical Condition |
| Constructions: |
Polycarbonate radome,detachable cable/connector for easy mount, rubber-O-ring between top radome and screw base for waterproof |
| Dimensions: |
60mm(Dia.) x 45mm(H) |
| Weight: |
200grams (w/o cable & connector). |
| Color: |
Standard in ivory white, other colours available upon request. |
| Mounting: |
Bulkhead mount with 0.8 inch threaded wing nut (standard accessory). |
| Mounting Adapters |
Pole mount to 1"-14 UNS threaded mast (optional) |
| Base mounting |
FB1 1"-14 UNS (optional) |
| Cable & Connector |
| RF cable: |
SMA(M) +10 meter RG58 +TNC(M) (standard) other length (optional) |
| Pulling strength: |
6 Kg @ 5sec. molded plastic on connector end for strain relief. |
| Connector |
TNC(F) or SMA(F) |
| Antenna Element |
| Center Frequency: |
2338.75 MHz +/-6.25 MHz |
| Polarization: |
R.H.C.P. (Right Handed Circular Polarization). |
| Absolute Gain @ Zenith: |
+2 dBi typical. |
| Gain @ 10o Elevation: |
1 dBi typical. |
| Axial Ratio: |
3 dB max. |
| Output VSWR: |
2.0 max |
| Output Impedance: |
50 ohm |
| Low Noise Amplifier |
| Center Frequency: |
2338.75+/-6.25 MHz |
| Power Gain: |
30db +/-1db |
| Bandwidth: |
10 MHz min. |
| Noise Figure: |
1.0 typ |
| Outer Band Attenuation: |
10 dB min. @ Fo +/-10 Mhz. |
| Supply Voltages: |
4~5.5V DC. |
| Current Consumption: |
4V : 10.3 mA Typical
4.5V : 12 mA Typical
5V: 13 mA Typical
5.5V: 15 mA Typical |
| Output Impedance: |
50W ohm |
| Overall Performance: (antenna element, LNA & coax cable) |
| Center Frequency: |
2338.75+/-6.25 Mhz. |
| Gain: |
At 90o vertical to sky 30 ± 4.5dBi
(cable loss) Note:1
Mounted on the 60mm x 60mm square ground plane |
| Noise Figure: |
1.0 max. |
| Axial Ratio: |
2 dB max. |
| Bandwidth: |
10 MHz min. @S11£-10 dB |
| VSWR: |
2.0 max. |
| Output Impedance: |
50W ohm |
| Environmental |
| Operating Temperature: |
-40oC~ +85oC. |
| Storage Temperature: |
-40oC~ +90oC. |
| Relative Humidity: |
95% non-condensing. |
| Water Resistance: |
100% waterproof. |
